DE
EN
Consul Auxiliary lift, spray galvanized - SURCHARGE
Auxiliary lift, spray galvanized - SURCHARGE... Mehr Lesen
Consul Adaption for enlargement of column distance to 3.000 mm
Enlargement of column distance to 3.000 mm. For the 4.45er-series.... Mehr Lesen
Consul Anti-Slip coating for platforms - not retrofittable
Anti-Slip coating for platforms - not retrofittable... Mehr Lesen
Consul Drive-on/off flaps incl. roll back protection
Drive-on/off flaps incl. roll back protection, for lifts without wheel alignment equipment for recessed installation. 1 set = 2 pieces.... Mehr Lesen
Consul Drive-on/off flaps incl. roll back protection
Drive-on/off flaps incl. roll back protection, for lifts with wheel alignment equipment for recessed installation. 1 set = 2 pieces.... Mehr Lesen
Consul Drive-on/off ramps incl. roll-back protection
'Incl. roll-back protection. Length approx. 1.000 mm. 1 set = 2 pieces.'... Mehr Lesen
Consul Drive-on/off ramps, straight, extended
'Length approx. 1.500 mm. 1 set = 2 pieces.'... Mehr Lesen
Consul Lifting bridge for frame vehicles
With 2 movable adapters and turn table spindle, up to 3.000 kg. For 4.45-series, double-scissor-, scissor-, 2- and 4 ram-inground-lifts with platforms. Please quote lift type on order by all means!... Mehr Lesen
Consul Lifting platform for light adjustment device
Beam mounted to the platform for exact positioning of a light adjustment system.No additional guide rails on the floor that could present a trip hazard.... Mehr Lesen
Consul Lighting, 4x LED Lamps, not mounted
LED Lamps, not mounted, consists of : 4x LED 45° (1.235 mm lang), 1x switch + cables... Mehr Lesen
Consul Turn table replacement cassettes 475 / 500 mm
For light adjustment on the respective lift the turn tables will be removed and replaced with the turn table replacement cassettes. 475 / 500 mm... Mehr Lesen
Consul Elastomer adapters 250 x 150 x 20 mm
For lifts with integrated auxiliary lift. 1 set = 4 pieces.... Mehr Lesen
Consul Elastomer adapters 250 x 150 x 40 mm
'For lifts with integrated auxiliary lift. 1 set = 4 pieces.'... Mehr Lesen
Consul Elastomer adapters 250 x 150 x 60 mm
For lifts with integrated auxiliary lift. 1 set = 4 pieces.... Mehr Lesen
Consul Elastomer adapters 250 x 150 x 90 mm
For lifts with integrated auxiliary lift. 1 set = 4 pieces.... Mehr Lesen
Consul Platforms, high-quality spray galvanization,
Platforms, high-quality spray galvanization, surface and sides, especially for AV/AM-Versions... Mehr Lesen
Consul Hydraulic oil in 5L-container
'5 liter container hydraulic oil (HLP 22) suitable for all Consul lifts with hydraulic drive. Necessary amount to be ordered depends on lift type. '... Mehr Lesen
Consul Air connection in platforms e.g for jacking beam
Air connection in platforms e.g for jacking beam... Mehr Lesen
Consul Fast-Drive unit
Fast-Drive unit, for shortening lifting and lowering time to approx. 25 sec. for lifts with SN... Mehr Lesen
Consul Special painting (RAL colour code is required)
'Special painting (RAL colour code is required)'... Mehr Lesen
Consul Control unit according to OEM industry standard
'Control unit according to OEM industry standard - please state OEM upon order'... Mehr Lesen
Consul Jacking beam 0.20 ZH
Pneumatic-hydraulic jacking beam with capacity of 2.000 kg for Consul lift with platforms.... Mehr Lesen
Consul Jacking beam 0.26 ZH
Pneumatic-hydraulic jacking beam with capacity of 2.600 kg for Consul lift with platforms.... Mehr Lesen
