DE
EN
Consul Adaptors for 3D wheel alignment set for Beissbarth Easy 3D
Adaptors for 3D wheel alignment set for Beissbarth Easy 3D for scissor lifts. Suitable for subsequent installation. 1 set = 2 pieces.... Mehr Lesen
Consul Anti-Slip coating for platforms - not retrofittable
Anti-Slip coating for platforms - not retrofittable... Mehr Lesen
Consul Drive-on/off ramps incl. roll-back protection
'Incl. roll-back protection. Length approx. 1.000 mm. 1 set = 2 pieces.'... Mehr Lesen
Consul Drive-on/off ramps, straight, extended
'Length approx. 1.500 mm. 1 set = 2 pieces.'... Mehr Lesen
Consul Control box placement right - SURCHARGE
Control box placement right - SURCHARGE... Mehr Lesen
Consul Fixing material 0.35/0.40
Fixing material for 0.35/0.40 series, consists of 28 reaction anchors M16 and bolts.... Mehr Lesen
Consul Lighting, 4x LED Lamps, not mounted
LED Lamps, not mounted, consists of : 4x LED 45° (1.235 mm lang), 1x switch + cables... Mehr Lesen
Consul Turn table replacement cassettes 475 / 630 mm
For light adjustment on the respective lift the turn tables will be removed and replaced with the turn table replacement cassettes. 475 / 500 mm... Mehr Lesen
Consul Platforms, high-quality spray galvanization,
Platforms, high-quality spray galvanization, surface and sides, especially for AV/AM-Versions... Mehr Lesen
Consul Axle play detector set 630, hydraulic
Axle play detector set, hydraulic with 18 moving directions length-/crosswise in total, for vehicles with max. 2,000 kg, to be mounted in platforms, superstruction of 50 mm, incl. drive-on block, for lifts WITHOUT wheel alignment set (state country-specific version)... Mehr Lesen
Consul Axle play detector set, hydraulic
Axle play detector, hydraulic – installation height only 50 mm – (state country-specific version)... Mehr Lesen
Consul Axle play detector set, SURCHARGE for installation
Axle play detector set, SURCHARGE for installation... Mehr Lesen
Consul Hydraulic oil in 5L-container
'5 liter container hydraulic oil (HLP 22) suitable for all Consul lifts with hydraulic drive. Necessary amount to be ordered depends on lift type. '... Mehr Lesen
Consul Air connection in platforms e.g for jacking beam
Air connection in platforms e.g for jacking beam... Mehr Lesen
Consul Leveling installation, hot-dip galvanized
Leveling installation, hot-dip galvanized, recommended for AM-versions, height + approx. 3 mm... Mehr Lesen
Consul OEM sliding plates
'OEM sliding plates with radial bearing system for platform width 630 mm, only usable in connection with AM-Set'... Mehr Lesen
Consul Pneumatic locking of sliding plates
Pneumatic locking of sliding plates only in combination with wheel alignment set, order 2x... Mehr Lesen
Consul Hose extension 2.000 mm
Hose extension to unit each 2,000 mm, please state lift type, only for new lift orders (only partially retrofittable)... Mehr Lesen
Consul Special painting (RAL colour code is required)
'Special painting (RAL colour code is required)'... Mehr Lesen
Consul Control unit according to OEM industry standard
Control unit according to OEM industry standard - please state OEM upon order... Mehr Lesen
Consul Connection brace ASD
Connection brace ASD, only order in connection with play detector, depending on version 2x front + back... Mehr Lesen
Consul Preparation for light adjustment - SURCHARGE
Preparation for light adjustment - SURCHARGE... Mehr Lesen
Consul Jacking beam 0.20 ZH
Pneumatic-hydraulic jacking beam with capacity of 2.000 kg for Consul lift with platforms.... Mehr Lesen
Consul Jacking beam 0.26 ZH
Pneumatic-hydraulic jacking beam with capacity of 2.600 kg for Consul lift with platforms.... Mehr Lesen
