Consul 4-post lift 4.45 L-SN

Extreme compact 4 post lift suitable for lifting and wheel aligment of passenger cars and commercials with a total weight up to 4.500 kg, even for larger vehicles with long wheel base due to extra long platforms. With integrated wheel free scissor (3.500 kg).

Design features:

  • Low noise hydraulic under oil drive
  • Electro-hydraulic control
  • Operation in drive-on direction front left
  • Separated main switch (can be locked as required by CE)
  • Acoustic foot protection
  • Hydraulic traction cylinder
  • Slack cable, cable failure safety feature and roll back protection
  • Platform with 1000 mm long drive-on ramps for sporty vehicles
  • One platform almost fully adjustable, with locking mechanism
  • Integrated rail for jacking beam
  • Integrated wheel free scissor with extendable supports
  • Wheel free scissor with Master/Slave hydraulic system
  • Inclusive 40 mm elastomer pick ups
  • Central control for pneumatic locking device (8 bar)
  • Locking bars for overall lifting height with locking device each 100 mm
  • Optional with post clearance 3.000 mm
  • Protection class IP 54 GS-approved, DIN EN 1493, CE-approved

When ordering with wheel alignment set:

  • Integrated full size sliding plates
  • System for turn tables up to 50 mm height, with serial turn table cover

Consul Auxiliary lift, spray galvanized - SURCHARGE

Auxiliary lift, spray galvanized - SURCHARGE... Mehr Lesen

Consul Wheel alignment set, complete 4.45 L-SN

Complete wheel alignment set for lifts with wheel free lift, platform width 500 mm, platform length 4.810 mm.... Mehr Lesen

Consul Adaptors for 3D wheel alignment set for Beissbarth Easy 3D

Adaptors for 3D wheel alignment set for Beissbarth Easy 3D for 4 post lifts. Suitable for subsequent installation. 1 set = 2 pieces.... Mehr Lesen

Consul Add-on kit of sliding plates

Add-on kit of sliding plates. For subsequent installation, for lifts with flat platforms.... Mehr Lesen

Consul Adaption for enlargement of column distance to 3.000 mm

Enlargement of column distance to 3.000 mm. For the 4.45er-series.... Mehr Lesen

Consul Anti-Slip coating for platforms - not retrofittable

Anti-Slip coating for platforms - not retrofittable... Mehr Lesen

Consul Drive-on/off flaps incl. roll back protection

Drive-on/off flaps incl. roll back protection, for lifts without wheel alignment equipment for recessed installation. 1 set = 2 pieces.... Mehr Lesen

Consul Drive-on/off flaps incl. roll back protection

Drive-on/off flaps incl. roll back protection, for lifts with wheel alignment equipment for recessed installation. 1 set = 2 pieces.... Mehr Lesen

Consul Drive-on/off ramps incl. roll-back protection

'Incl. roll-back protection. Length approx. 1.000 mm. 1 set = 2 pieces.'... Mehr Lesen

Consul Drive-on/off ramps, straight, extended

'Length approx. 1.500 mm. 1 set = 2 pieces.'... Mehr Lesen

Consul Lifting bridge for frame vehicles

With 2 movable adapters and turn table spindle, up to 3.000 kg. For 4.45-series, double-scissor-, scissor-, 2- and 4 ram-inground-lifts with platforms. Please quote lift type on order by all means!... Mehr Lesen

Consul Lifting platform for light adjustment device

Beam mounted to the platform for exact positioning of a light adjustment system.No additional guide rails on the floor that could present a trip hazard.... Mehr Lesen

Consul Compensation set 500

Compensation set for even platforms 500 mm, height 50 mm. For subsequent installation, please quote lift type.... Mehr Lesen

Consul Fixing material 4.45

Fixing material for 4.45 series, consists of 16 reaction anchors M12 and bolts.... Mehr Lesen

Consul Lighting - SURCHARGE for installation

Lighting - SURCHARGE for installation... Mehr Lesen

Consul Lighting, 4x LED Lamps, not mounted

LED Lamps, not mounted, consists of : 4x LED 45° (1.235 mm lang), 1x switch + cables... Mehr Lesen

Consul Wiring for MKS-System

Harting wiring for MKS-System. Please state wheel alignment device, with electronic diagram.... Mehr Lesen

Consul Turn table replacement cassettes 475 / 500 mm

For light adjustment on the respective lift the turn tables will be removed and replaced with the turn table replacement cassettes. 475 / 500 mm... Mehr Lesen

Consul Easy-Slide platform system (surcharge)

Easy-Slide platform system (surcharge)... Mehr Lesen

Consul Elastomer adapters 250 x 150 x 20 mm

For lifts with integrated auxiliary lift. 1 set = 4 pieces.... Mehr Lesen

Consul Elastomer adapters 250 x 150 x 40 mm

'For lifts with integrated auxiliary lift. 1 set = 4 pieces.'... Mehr Lesen

Consul Elastomer adapters 250 x 150 x 60 mm

For lifts with integrated auxiliary lift. 1 set = 4 pieces.... Mehr Lesen

Consul Elastomer adapters 250 x 150 x 90 mm

For lifts with integrated auxiliary lift. 1 set = 4 pieces.... Mehr Lesen

Consul Platforms, high-quality spray galvanization,

Platforms, high-quality spray galvanization, surface and sides, especially for AV/AM-Versions... Mehr Lesen

Consul Axle play detector set 500, hydraulic

Axle play detector set with 18 moving directions length and crosswise in total, for vehicles with max. 2.000 kg, to be mounted in front of platforms (500 mm). Please order with Art. No. 403691 for ex works installation!... Mehr Lesen

Consul Axle play detector set 500, hydraulic

Axle play detector set 500, identical with 488551, however only usable in connection with column distance of 3.000 mm (385807) with 18 moving directions length and crosswise in total, for vehicles with max. 2.000 kg, to be mounted in front of platforms (500 mm). Please order with Art. No. 403691...... Mehr Lesen

Consul Axle play detector set, hydraulic

Axle play detector, hydraulic – installation height only 50 mm – (state country-specific version)... Mehr Lesen

Consul Axle play detector set, SURCHARGE for installation

Axle play detector set, SURCHARGE for installation... Mehr Lesen

Consul Hydraulic oil in 5L-container

'5 liter container hydraulic oil (HLP 22) suitable for all Consul lifts with hydraulic drive. Necessary amount to be ordered depends on lift type. '... Mehr Lesen

Consul Air connection in platforms e.g for jacking beam

Air connection in platforms e.g for jacking beam... Mehr Lesen

Consul OEM sliding plates

OEM sliding plates with radial bearing system for platform width 500 mm, only usable in connection with AM-Set, order 2x for type XLT... Mehr Lesen

Consul Pneumatic pressure controller

Pneumatic pressure controller... Mehr Lesen

Consul Fast-Drive unit

Fast-Drive unit, for shortening lifting and lowering time to approx. 25 sec. for lifts with SN... Mehr Lesen

Consul Greasable pulley bolts

Greasable pulley bolts... Mehr Lesen

Consul Special painting (RAL colour code is required)

'Special painting (RAL colour code is required)'... Mehr Lesen

Consul Control unit according to OEM industry standard

'Control unit according to OEM industry standard - please state OEM upon order'... Mehr Lesen

Consul Maintenance unit 0 - 16 bar

Scissor Lifts |... Mehr Lesen

Consul Jacking beam 0.20 ZH

Pneumatic-hydraulic jacking beam with capacity of 2.000 kg for Consul lift with platforms.... Mehr Lesen

Consul Jacking beam 0.26 ZH

Pneumatic-hydraulic jacking beam with capacity of 2.600 kg for Consul lift with platforms.... Mehr Lesen

Consul Auxiliary lift, spray galvanized - SURCHARGE
Consul Auxiliary lift, spray galvanized - SURCHARGE
Consul Wheel alignment set, complete 4.45 L-SN
Consul Wheel alignment set, complete 4.45 L-SN
Consul Adaptors for 3D wheel alignment set for Beissbarth...
Consul Adaptors for 3D wheel alignment set for Beissbarth Easy 3D
Consul Add-on kit of sliding plates
Consul Add-on kit of sliding plates
Consul Adaption for enlargement of column distance to...
Consul Adaption for enlargement of column distance to 3.000 mm
Consul Anti-Slip coating for platforms - not retrofittable
Consul Anti-Slip coating for platforms - not retrofittable
Consul Drive-on/off flaps incl. roll back protection
Consul Drive-on/off flaps incl. roll back protection
Consul Drive-on/off flaps incl. roll back protection
Consul Drive-on/off flaps incl. roll back protection
Consul Drive-on/off ramps incl. roll-back protection
Consul Drive-on/off ramps incl. roll-back protection
Consul Drive-on/off ramps, straight, extended
Consul Drive-on/off ramps, straight, extended
Consul Lifting bridge for frame vehicles
Consul Lifting bridge for frame vehicles
Consul Lifting platform for light adjustment device
Consul Lifting platform for light adjustment device
Consul Compensation set 500
Consul Compensation set 500
Consul Fixing material 4.45
Consul Fixing material 4.45
Consul Lighting - SURCHARGE for installation
Consul Lighting - SURCHARGE for installation
Consul Lighting, 4x LED Lamps, not mounted
Consul Lighting, 4x LED Lamps, not mounted
Consul Wiring for MKS-System
Consul Wiring for MKS-System
Consul Turn table replacement cassettes 475 / 500 mm
Consul Turn table replacement cassettes 475 / 500 mm
Consul Easy-Slide platform system (surcharge)
Consul Easy-Slide platform system (surcharge)
Consul Elastomer adapters 250 x 150 x 20 mm
Consul Elastomer adapters 250 x 150 x 20 mm
Consul Elastomer adapters 250 x 150 x 40 mm
Consul Elastomer adapters 250 x 150 x 40 mm
Consul Elastomer adapters 250 x 150 x 60 mm
Consul Elastomer adapters 250 x 150 x 60 mm
Consul Elastomer adapters 250 x 150 x 90 mm
Consul Elastomer adapters 250 x 150 x 90 mm
Consul Platforms, high-quality spray galvanization,
Consul Platforms, high-quality spray galvanization,
Consul Axle play detector set 500, hydraulic
Consul Axle play detector set 500, hydraulic
Consul Axle play detector set 500, hydraulic
Consul Axle play detector set 500, hydraulic
Consul Axle play detector set, hydraulic
Consul Axle play detector set, hydraulic
Consul Axle play detector set, SURCHARGE for installation
Consul Axle play detector set, SURCHARGE for installation
Consul Hydraulic oil in 5L-container
Consul Hydraulic oil in 5L-container
Consul Air connection in platforms e.g for jacking beam
Consul Air connection in platforms e.g for jacking beam
Consul OEM sliding plates
Consul OEM sliding plates
Consul Pneumatic pressure controller
Consul Pneumatic pressure controller
Consul Fast-Drive unit
Consul Fast-Drive unit
Consul Greasable pulley bolts
Consul Greasable pulley bolts
Consul Special painting (RAL colour code is required)
Consul Special painting (RAL colour code is required)
Consul Control unit according to OEM industry standard
Consul Control unit according to OEM industry standard
Consul Maintenance unit 0 - 16 bar
Consul Maintenance unit 0 - 16 bar
Consul Jacking beam 0.20 ZH
Consul Jacking beam 0.20 ZH
Consul Jacking beam 0.26 ZH
Consul Jacking beam 0.26 ZH